Loading

TRANTEC

Digital Dominance

Trantec have again pushed the boundaries in digital technology with their new professional digital wireless microphone system. Quality of sound has never been this good!
6

Quality and Stability

Digitally processed sound by S7 system has almost no noise, remaining original and truthful, and is superior than analogue systems. S7 has AES/EBS, allowing digital console to be added in order to generate the best quality sound.
8
10

Multiple and Simultaneous Use of Channels

To avoid interference and noise in using analogue wireless microphones, the users have to be 60~100 meters apart. Only 30 ~50 meters is required for simultaneous use of the same channel for digital wireless microphones, allowing more microphones to be used in the same space.

PS. Different results may occur based on antenna positions and building materials.
Multi-active Channels
Better than analogue wireless microphones, digital wireless microphones are interference-free, allowing the number of channels in use to increase from 6 channels/4 MHz to 10 channels/4MHz. Multiple microphones can be used at the same time and space.
Higher Security
Up to 10 IDs can be programmed while transmitting digital sound. As long as the IDs are different, the S7 can receive the right signals without error, preventing the content of sound to be tapped.
Stable Wireless System
The reliable PLL synth technology allows S5 wireless microphone system to generate stable sound quality, providing a worry-free experience for the performer.
S7 SERIES SPECIFICATIONS
  • S-D7000 Wireless Set

    Frequency range

    606.250 ~ 637.125MHz

    AF THD+N

    < 0.05%

    Modulation type

    Properietary Digital

    Audio frequency response

    20Hz ~ 16kHz

    RF bandwidth

    < 200KHz

    Audio resolution

    24bit

    AF dynamic range

    > 105dBA

    Digital audio output

    AES3 (AES/EBU) 48kHz

  • S-D7802 Dual-channel Digital Receiver

    RF range

    606.250 ~ 637.125MHz

    AF output

    XLR / 1/4 inch jack mic/line

    RF connector type

    BNC (50Ω) front / rear mount

    Power

    AC 110V,60Hz

    Word clock input

    75 ohm or Hi-Z selectable

    Network connectivity

    TCP/IP

    Headphone monitor

    500mW,16Ω,3-polar Phone Jack

    Dimensions

    482 (W) x 44(H) x 362.6 (D) mm

  • S-D7200S Handheld Digital Transmitter

    RF range

    606.250 ~ 637.125MHz

    Battery

    2 x AA alkaline cells

    RF power

    50mW

    Battery life

    > 6 hours

    RF bandwidth

    < 200KHz

    Dimensions

    φ48 x 260 mm

    Audio attenuator

    15dB range

    Weight

    approx. 300g

    Capsule type

    Unidirectional dynamic
    Unidirectional Condensor

  • S-D7300 Beltpack Digital Transmitter

    RF frequency range

    606.250 ~ 637.125MHz

    AF connector

    LEMO 3pin sub-min connector

    RF power

    50mW

    AF Impedance

    Switchable Hi/Lo

    RF Bandwidth

    < 200KHz

    Battery

    2 x AA alkaline cells

    Audio attenuator

    30dB range

    Battery life

    > 6 hours

    Max AF input

    +7dBu

    Dimensions

    62 (W) x 168 (H) x 27 (D) mm

    Microphone phantom supply

    5V min

    Weight

    approx. 120g